Remote Equipment Modules (REM), shown above, are used on an outdoor aircraft wash rack, giving operators full control of Hydroblaster and Hydrofoamer operation. Strategically placed REM stations are designed to ensure complete airframe radius coverage for convenient and effective performance.

Equipment room with gas fired Hydroblaster pressure washers, automatic solution mix station, liquid/foam soap application system and Hydrokleen wastewater filtration and recycling system. Hydroblasters controlled by wash pad mounted Remote Equipment Module (REM) control stations. Filtration is plumbed to allow either closed-loop or pre-treatment before discharge to drain operation. Hydroblasters are configured to operate with either potable or recycled water.

Hydrokleen wash water filtration equipment modules; Continuous Media Automatic Filtration Unit (CMAFU) connected in a polishing loop with a Solids Settling Tank (SST) which discharges to an HE/8000 filtration system. HE/8000 discharges treated wastewater to Hydroblaster pressure washers for reuse. Excess wastewater is discharged to drain. Hydrokleen modules provide a highly efficient automatic wastewater treatment system that is easily configured for the application.

Outdoor rotary wing aircraft decontamination and corrosion control system. Hydro Engineering, Inc. wash rack systems provide the most efficient and functional design for both recycle operation and fresh water rinse.

Hydrosite portable equipment container; insulated with HVAC, backup heater, lights, secondary containment, Hydroblasters, Hydrokleen wastewater filtration system, soap mix station, liquid/foam soap application system and internally mounted hose reels for soap and washing operations. The equipment is mounted, plumbed and wired at the factory. Place and connect utilities for a fully functional wash and wastewater treatment system. Fully certified to UL and CE standards.