 Railroad Products
Site Navigation
|
  Railroad Products
Helping Union Pacific Save 50%
On Their Soap Usage
 |
| Click To Enlarge |
Union Pacific
Railroad purchased Hydro Engineering Inc's soap mixing and
foaming equipment and expects to save a lot of money! (Testing
verified up to a 50% savings in soap). All the savings plus,
the job became easier and safer!
The Hydrofoamer tested
out with less airborne inhilation which improves safety, all
while cleaning is enhanced due to the properties of foaming
soap.
Did we mention that
if you use half the soap, you only dispose of half the soap.
Another goal of reducing cost is being reached by Union Pacific
Railroad. |
Chemical Foaming
System "Hydrofoamer"
Stationary wall mount foaming system:
Hydrofoamer wall
mount foaming system. In testing at UPRR Hydrofoamers were
determined to be easier and safer to use and they used up
to 50% less soap in all cleaning operations.
As many as 5 wall
mount systems can be used in conjunction with the model 19408
soap mixing tank. Systems include spring retract hose reel
that hold 75 of dual foaming hose, safety ON/OFF trigger
gun with 36 wand and soap nozzle. A wall mount gun holster
is also included.
Foamer
Specifications (PDF format) |
Chemical Mixing System and Storage
Tank
The Union Pacific
Railroad buys soap in bulk. Hydro Engineering provides a safe
and simple solution to the handling of that bulk soap.
Here is how it works:
A line is provided from the large bulk tank to our soap mixing
tank. Via a chemically resistant pump, the soap is pumped
from your bulk tank to our mixing system. The soap is automatically
mixed to the exact dilution that you specify. Now the diluted
soap is pumped to up to 5 foaming stations, on demand.
Safe and simple operation along with
exact dilution ratios are the key to the Automatic Soap Mixing
Tank.
Part Number 19408
|
Chemical Foaming System - Hydrofoamer
(portable)
Hydrofoamer, portable
foamer is safe and simple to move on or under ramps or any
portion of the locomotive facility. The design of the soap
foamer is such that there are less airborne vapors produced
and evaporation of the soap is minimized keeping the people
and the environment safer. Testing proves that our Hydrofoamers
save up to 50% on soap use and soap disposal.
Standard with 50
hose, gun, wand and foaming nozzle. This is a self contained
foamer that carries 35 gallons of ready to use soap.
Part Number
19326
|
Chemical Foaming System - Hydrofoamer
(portable w/retract reel)
Hydrofoamer, portable
with retract reel, 50 hose, gun, wand and foaming nozzle.
This is a self contained foamer that carries 35 gallons of
ready to use soap.
This foamer proved
to use 50% less soap and provide the added safety benefits
of less airborne vapors with its use!
Part Number 19326, specify with retract reel
|
Oil Transfer System (pneumatic)
Oil transfer system
with pneumatic pumping system. This system carries up to 30
gallon of Journal or air compressor oil and transfers the
fluid via a pneumatic pumping system. Requires shop air.
The stability of the
oil transfer system eliminates spilling concerns and makes
it safe and simple to move on or under ramps or any portion
of the locomotive facility.
Part Number 19323P |
Hydroblaster, Hot Water, Wet
Abrasive Blasting System
Hydroblaster intake port cleaner.
This process
this the "only" Wet Abrasive Blast System that has been approved
by General Electric for intake port cleaning.
With the Hydroblaster
system intake port cleaning time is dropped to minutes instead
of hours.
Railroad testing shows
that the Hydroblaster intake port cleaner pays for itself
in labor savings every 12th engine washed.
Part Number 5/3000EHGV-RR
|
Hydroblaster, Low Emission Pressure
Washer
The CLGV Hydroblaster
meets California emission standards. With air quality a serious
problem, this is one pressure washer that passes the test.
The CLGV Hydroblaster
is the only pressure washer built that is certified to UL1776
for indoor, outdoor and wash bay use! SAFE AND SIMPLE
TO USE!
The Hydroblasters
portable design makes it easy to move on or under ramps or
any portion of the locomotive facility.
Part Number 4/2000CLGV-P
|
Hydroblaster Trailer Mounted
Wash/Recovery System
 |
Touch
picture to enlarge
|
UPRR and Hydro Engineering
jointly designed this system for washing M/W equipment. Tools
for collecting the wash water and filtering the wash water
for reuse are all standard. Over a 6 month trial period (1st
article test) the design was brought to completion.
The Hydroblaster provides
the ability to wash/collect/filter for an entire day before
having to properly dispose of the collected and filtered water.
The solids collected from the wash process are also captured
so they can be properly disposed of.
This safe and simple
system is helping UPRR eliminate the risk of fines for improper
washing. Dont let your wash water hit the ground. The Hydroblaster
provides the tools to meet the EPA regulation 40CFR122.2 clean
water act.
Part Number
5/3GHOTT-UPRR |
Rail Car Washing
 |
Olympic Cars
Being Washed
|
Hydro Engineering Inc
manufactures state of the art portable or stationary equipment
for both locomotive and car wash applications.
Hydroblasters are
built tough to handle rail applications, and because they
meet the latest safety requirements, your assured to provide
the best tools for your personel. |
|
