 Screen Reclaiming Products
Site Navigation
|
  High Pressure Screen Reclaiming,
Turned Automatic
In 1980
Hydro Engineering Inc. set the standard when we introduced
3000 PSI reclaiming to the Screen Print Industry. Screen Printers
immediately started saving money on labor, chemicals and other
related costs.
A side benefit emerged
with high pressure reclaiming, all of the contaminants (ink
and emulsion) removed from the screen by high pressure come
off in a solid form. As a solid these contaminants can easily
be removed from the waste stream by mechanical filtration
methods sending purified water to the sanitary sewer.
High pressure reclaiming also allows wastewater to be recycled,
this is crucial for those printers that are not on a city
sewer system (sanitary sewer). Chemicals and contaminants
from the reclaiming process can kill a septic system allowing
the drain field to plug up and ground water contamination
to exist.
Now, we're introducing
a way to get the gun out of your employee’s hands.
|
The ARS Roll-over System
 |
The
ARS roll-over system
|
The ARS Roll-over
version
Just like the automatic
carwash where you wash your car, you drive in and park and
the carwash does the work. The ARS roll-over design holds
the screen stationary then its cleaning head passes over the
screen doing all of the work.
Compact and powerful
this ARS system can be placed with zero clearance on each
side allowing you to install it almost anywhere.
Like our conveyor
version this ARS cleans both sides simultaneously removing
the pressure washer gun from your employees hands.
ARS
Rollover in action (movie)
ARS
Roll Over Specification (PDF)
|
The Automatic Reclaiming System
(ARS) Conveyor
 |
ARS
Conveyor Version
|
The ARS is
also available in a conveyor version
Our conveyor version
allows you to run one screen after another through, non-stop
making automatic reclaiming even faster.
Like our roll-over
version this ARS cleans both sides simultaneously removing
the pressure washer gun from your employees hands
.
ARS
Conveyor in action (Movie)
ARS
Conveyor Specification (PDF) |
The ARS Hydroblaster Power Unit
 |
Hydroblaster
Power Unit
|
Our high
pressure power unit may be located anywhere you can reach
the ARS cleaning system by pipe or hose.
With the power
unit remotely located all connections to the cleaning system
are easily run. High pressure pipe or hose transfers the water
and low voltage controls (24 volt) allow the operator to turn
the power unit on and off as required.
The ARS power unit
is sized to meet the requirements of the cleaning heads within
the ARS screen cleaning system.
|
ARS Screen Degreasing and Drying
System
 |
Automatic
Degreasing
|
This single head
automatic degreasing machine for screen printing completely
cleans a screen every 12 seconds. The screens come out totally
dry and ready for re-coating.
ARS
Degreaser/Dryer Conveyor in action (Movie) |
|
