What a great way to extend water based coolant life! Combine a Hydrokleen CMAFU-2 solids filtration system that can be moved from machine to machine to filter coolant. Add Hydro Biodigesters to control tramp oil and organics that promote odor causing bacteria and can foul pumps and lines without using disinfectants. Biodigesters are introduced with a small programmable timer and pumping system. It's a simple solution that really works.

Our Coolant Care System is a centralized machine shop coolant cleaning system that can service multiple; CNC, milling and/or grinding machines. The Coolant Care provides up to 50 gallons per minute of filtered coolant back to the machines.

Every part of the CNC, grinding or milling machine stays cleaner, even the coolant galleys. No more sludge in coolant tanks to deal with. No stink and best of all, more productivity.

How does your coolant look after 5 MONTHS of use? This coolant has been in use 20 hours per day, 6 days a week and it looks like fresh coolant!

Here's how it works. As dirty coolant is transferred to the CMAFU-2 the coolant passes through a bed of filter paper. As solids collected blind the filter paper, the coolant level rises on top of the paper. This engages a mechanical float that activates the media advance motor and allows for a small amount of clean filter media to advance.

The coolant level drops and media stops advancing. A single 100-yard roll of filter media allows for a tremendous amount of solids to be filtered without operator intervention. NO CARTRIDGE FILTERS to clean or change out!

The CMAFU-2 filtration unit is wheel mounted and portable and was designed to clean coolant in all types of cutting and grinding machines.

Set up is simple with the CMAFU-2, just roll it to the grinding, milling, C&C or cutting machine to be cleaned, hook up 110 volt power (only 15 amps).

Place our pump transfer system in the coolant reservoir attach the inlet hose to the CMAFU-2, drop in the filtrate return hose and your ready to go.

Our Portable Coolant Cleaning System is ready to work. Coolant laden sludge is pumped from the reservoir and spread across the filter media. Working like a coffee filter the solids stay on top of the filter media and the filtered coolant runs through. The coolant is returned to the reservoir by the Automatic Pumping System located in the CMAFU-2.

As the filter media plugs up with solids the conveyor it's supported by automatically moves forward exposing fresh filter media to the coolant stream. Spent filter media is dumped into the catch container where it's almost dry.

Our Hydro-Biodigesters bacterial product has eaten all of the Tramp oil and the CMAFU-2 Coolant Cleaning System has removed the solids down to < 5 microns. The coolant is clean and the system can now be moved to another machine to work its magic.