Hydroblaster Pressure Washers

High Pressure Cleaning Systems

We built our first Hydroblaster in 1980 and since then have developed hundreds of different models and configurations. All Hydroblasters are certified to UL-1776, CSA and CE standards making them among the safest in the world.

Hydroblaster are available powered by electric motors, gasoline and diesel engines and pneumatic motors. Hot water Hydroblasters can be fueled with electricity, oil (diesel, kerosene, JP4 & JP8), LP or Natural gas. And with water flows up to 60 GPM and pressures to 5000 PSI, it’s likely that we have just the system for your application. Whether you have 50 or 60 Hertz power, we can deliver a system to meet your needs.

Start With Choosing The Type You Need

Electric Powered, Hot Water

Engine Driven, Hot Water

Electric and Gasoline Powered, Cold Water

Hydroblaster Pressure Washing Trailers

Remote Control Stations

Trailer Mounted Systems

Pressure Washer Accessories

"Hydro Gets The Job Done"
Shawn Stanco, Repair Division USS George Washington

"Our first Hydroblaster lasted longer than the 4 other pressure washers we bought combined"
Stacey Wharton, Plant Manager, Marathon Apparel, Childsburg, AL

"I Don't Anticipate Ever Replacing This Pressure Washer"
Robert Calhoun , Plant Manager Active Graphix, San Diego CA

"Gee This Hydrofoamer Really Works!"
Embarrassed Customer Says

PRODUCTS - Project Gallery

  • Image Description
  • image description
  • image description
  • image description
  • image description
  • image description
  • image description
  • image description
  • image description
  • image description

Pressure Washers, Electric Powered, Hot Water

SSOV

CLOV, Oil Fired
2-4 GPM @ 1-3,000 PSI
CLGV, Gas Fired
2-4 GPM @ 1-3,000 PSI
EHOV, Oil Fired
3-10 GPM @ 2-5,000 PSI
EHGV, Gas Fired
3-10 GPM @ 2--5,000 PSI
SSOV, Oil Fired
2-4 GPM @ 1-3,000 PSI
Heater Oil/Gas
2-10 GPM @ 1-5,000 PSI


Pressure Washers, Engine Powered, Hot Water
 
GSOV, Gasoline powered
3.5-5 GPM @ 3,000 PSI
GOVS, Gasoline powered
3.5-5 GPM @ 3,000-5,000 PSI
GHO, Gas or Diesel
3.5-5 GPM @ 3,000-5,000 PSI
 


Pressure Washers, Electric and Engine Powered, Cold Water

EI
EC, Electric Motor Driven
2-3 GPM @ 1-3,000 PSI
E, Electric Motor Driven
2-10 GPM @ 1-5,000 PSI
G, Gas Engine Driven Portables
3.5-5.6 GPM @ 3-5,000 PSI
GS, Gas or Diesel Engine Driven Skid
3.5-10 GPM @ 1-5,000 PSI
Demucking Systems, Electric Driven
30-60 GPM @ 200 PSI


Pressure Washer Remote Stations

Remote Control Water Supply Remote
Multiple Remote Control
Remote Control
Machine & Heat ON/OFF
Recycling Controls both Fresh/Recycled Water
Multi-Blaster allows several Machines to be controlled by Multiple Remotes
Remote Equipment Modules
in three configurations
 


Pressure Washer Accessories

Hydrofoamer Hydroscrubber
Stand Alone Heating Module
Gas (Lp or Natural) or Oil Fired
Chemical Application System
4-6 CFM @ 80-100 psi.
AAU
Abrasive Application Unit
Floor Cleaner With
Vacuum Recovery


Pressure Washers, Trailer-Mounted

Hydroblaster Pressure Washing Trailers are ready for any Hydroblaster Pressure Washer and are fully customizable from tank size to hose length. The basic trailer includes the following:
  • Structural steel frame fully protected with epoxy primer and paint.
  • Properly rated suspension and components.
  • Steel frame mounting points for all Hydroblaster pressure washers and steam cleaners.
  • Balanced load to optimize towing characteristics.
Since 1980 Hydro Engineering Inc has built the toughest trailer-mounted pressure washers available anywhere. Whether you're in mining, contract cleaning, the US Air Force or anywhere abnormally tough use requires the best... it's got to be a Hydroblaster.

Hydroblaster Single Axle Trailers
Hydroblaster Tandem Trailers