Hydro Engineering Inc. has been making pressure washing equipment for the Contract Cleaning Industry since 1980 with the understanding that making money requires equipment that works as hard as you do.
My
Hydroblaster is excellent, it's has been a major player in the
success of my business
Rick MIlls Owner, Seven County Environmental Steam Cleaning
Hydro
Gets The Job Done!
Shawn Stanco, Repair Division USS George Washington
How
Well My Hydro Engineering Equipment Performs
Cliff Reed
PA Cleaning Systems
Gee
This Hydrofoamer Really Works!
Embarrassed Customer Says
It All Starts With The Right Pressure Washer
This Hydroblaster pressure washer is the most portable and versatile high pressure washer on the market. Its 18 HP, electric start engine is tucked inside a unique frame that supports both the engine, pumping system, heating coil, burner, dual fuel tanks and battery. Sitting in the stationary position the wheels won’t touch the ground, once tilted back onto all four wheels this machine will move anywhere. Even through a standard man door or garden gate. |
 |
|
Our GHO series pressure
washer is the toughest machine on the market. Its 3, 4 &
6” steel channel frame forms the base of the unit. All moving
parts are fully enclosed in a cabinet that can be purchased
in either mild- painted or stainless steel. The GHO Hydroblaster
line is available in; gasoline, LP gas or diesel powered systems
with flow rates to 10 GPM and pressures up to 5,000 PSI. |
 |
|
Many Contract Pressure Washing Companies Use Trailer Mounted Pressure Washers |
||
| Single Axle trailers offer versatility allowing them to be pulled by smaller vehicles but are limited to hauling less water. Water tank volume determines how long you can wash, this is particularly important if your water source is miles away. If you have a water source on every job that’s within easy reach or each job requires little time on site a single axle trailer may be just what you need. |  |
|
Tandem Axle trailers offer larger water carrying capacity
allowing longer washing cycles. This Hydroblaster TT475 pressure
washing trailer system holds 475 gallons of water, chemicals,
hose reels, and everything you need. If you have a 5 gallon
per minute pressure washer and the average trigger pull time
(duty cycle) is 50% you can remain on the job working for over
3 hours. |
 |
|
Get The Right Accessories
This simple attachment turns your Hydroblaster pressure washer into a wet abrasive blast system. No air is required and the blasting process is 100% dust free. |
 |
|
Floor Cleaner that will operate
up to 5,000 PSI, With Vacuum Recovery 250 CFM, 110 volts @
20 amps.
|
 |
Hot News
New Products
